CycleBoard Help Center

Brake Bleeding

Bleeding the brakes removes air from the braking system and restores a firm brake handle. It is recommended that the ...

Brake Pad Replacement

Brake material will wear out over time as the mechanical brakes are used which will require replacement. The pads can...

Brake Sensor Adjustment

All Models - The brake sensor performs the function of cutting power to the motor when the brake handle lever is pull...

Brake Caliper Adjustment

A ticking noise coming from the rear of the board is an indication that the caliper is out of alignment and needs to ...

Brake Handle Replacement (Hydraulic)

It is recommended to only replace the brake handle if the handle has been damaged from a crash or the brakes do not p...

Front Wheel Alignment

The alignment process brings the front wheels into parallel (from a bird's-eye view), also known as zero toe, when th...

Front Tire/Tube Replacement (10" x 3")

Rover/Golf.  This guide provides the instructions for the replacement of the Front tires (10" x 3") for the Rover and...

Front Wheel Replacement (8.5" x 2.25")

Elite/Elite Pro. Elite / Elite Pro Front Wheel Replacement Video ‍ The 8.5” x 2.25” Front Wheel is sold fully asse...

Removing / Replacing your Old Front Springs

How to remove & replace your old front springs Follow these steps below to learn how you can remove your old front ...

Charging Port Replacement (Elite)

A damaged charge port or charge port fuse may prevent the battery from charging. Required Equipment 8 mm socket (h...

Charging Port Cover Replacement (Elite Pro/Rover/Golf)

Squeaking while riding is usually from the suspension components and is normal with normal use. Squeaking can be redu...

Connectors Overview

Comprehensive Guide of all connectors used on CycleBoard models. Battery Connectors XT- 90 - Pull apart firmly at t...

LCD Display Error Codes

Introduction to error codes of all models of CycleBoard and some fixes to it. Error codes are specific to the sty...

LCD Display Replacement

The LCD Display is designed to be easily replaced by the user in the unlikely event that it gets damaged. Required...

Motor And/Or Brake Disk Replacement

Motor or brake disk replacement guide for all current models of CycleBoard. Required Equipment 8 mm socket Ratche...

Throttle Replacement – Elite Pro/Rover G1

Throttle replacement guide for Rover and Elite Pro models delivered in 2019 with the thumb throttle separate from the...

Removing the CycleBoard Elite Pro Controller

All CycleBoard Elite pro models come with a controller unit in the chassis of the board. If your board has a defectiv...

Rear Tire/Tube Replacement (10" x 4")

First Gen Rear Tire Removal Guide for Rover G1. Please Refer to the Rear Wheel Removal Guide to fully remove the rear...

Rear Tire/Tube Replacement (10" x 3.5")

Rover GEN2/Golf.  Rear Tire & Inner Tube replacement for Rover GEN2 and Golf models 10" x 3.5" Rear Tire/Inner Tube ...

Steering Springs Adjustment

The steering springs perform the function of centering the board during steering. This increases stability as the boa...